In a house, electricity is a fundamental element, both for our comfort and day-to-day. However, it would be best if you always were cautious when handling or fixing electrical appliances. A lousy arrangement or lack of knowledge could damage not only an electrical device or installation but also jeopardize our safety.
Therefore, we analyse the most common electrical problems so that you know how to recognize them and take the necessary measures:
The Differential Jumps
you plug in a device, and the power went out. This problem is widespread and is usually due to an excess of connected electrical appliances in the home. This often happens when the limit of the electrical power is reached; This excess will make the differential jump and the light go out. However, if it happens to us very often, it is best to contact a professional electrician. This way, you can check if there is a problem and find out its origin.
This can be a problem with severe consequences. It usually occurs when there is a bad electrical connection or when there is an insulation failure, especially in older appliances. Other causes may be due to the deterioration of electrical devices or cables or the excess of devices connected to the same worldwide power plug (ปลั๊กไฟ ทั่ว โลก which is the term in Thai)
Appliances That Do Not Work
in these cases, the first thing is to check that the plug to which the device is connected works. The same happens with light bulbs and sockets (เต้ารับ which is the term in Thai) for example, it is advisable to check if it was the light bulb that does not work or if it is the installation that fails.
Change outlets are outdated, malfunctioning, or even because we change the colours or decoration of our home, this task is quite common in all houses. In general, it is usually easy to change a plug, but you should always take precautions. The main thing is to disconnect the switch from the public panel of the house, to avoid dangers with the current. Then, you have to unscrew and access the socket mechanism. If you have never done this process, it is best to have the help of someone who knows how to do it since you will have to connect the cables and be careful with the electric current.